Does rapid maxillary expansion induce adverse effects in growing subjects?

To assess the scientific evidence that rapid maxillary expansion (RME) causes Adverse Effects on the midpalatal suture, vertical dimension, dental and periodontal structures in growing subjects. MATERIALS AND METHODS: Electronic databases were searched for articles dated through December 2011. The quality of the studies was ranked on a 13-point scale in which 1 was the low end of the scale and 13 was the high end. RESULTS: Thirty relevant articles were identified. The amount of midpalatal suture opening ranged from 1.6 to 4.3 mm in the anterior region and from 1.2 to 4.4 mm in the posterior region. At the end of the active phase, RME resulted in slight inferior movement of the maxilla (SN-PNS +0.9 mm; SN-ANS +1.6 mm), increased tipping of anchored teeth from 3.4° to 9.2° and bending of the alveolar bone from 5.1° to 11.3°. In the long term, RME did not modify the facial growth patterns, and no significant changes on dentoalveolar structures were observed. Of the 30 studies, 2 were medium-high quality, 8 were medium quality, and 20 were low quality. CONCLUSIONS: RME always opened the midpalatal suture in growing subjects. The vertical changes were small and transitory. In the long-term evaluation, an uprighting of anchored teeth was observed and periodontal structures were not compromised

Effects of cervical headgear and pendulum appliance on vertical dimension in growing subjects: a retrospective controlled clinical trial

Summary OBJECTIVE : To analyze the effects on vertical dentoskeletal dimension produced by cervical headgear (CHG) or Pendulum (P) both followed by full fixed appliances in growing patients with Class II malocclusion

Treatment and posttreatment skeletal effects of rapid maxillary expansion studied with low-dose computed tomography in growing subjects

Introduction: The aim of this study was to apply low-dose computed tomography (CT) to evaluate treatment and posttreatment effects produced by rapid maxillary expansion (RME) at the levels of the midpalatal suture and the pterygoid processes. Methods: A sample of 17 subjects (7 boys, 10 girls; mean age, 11.2 years) was analyzed. Multi-slice CT scans were taken before RME, at the end of the active expansion phase, and after a retention period of 6 months. Statistical analysis was performed with ANOVA for repeated measures with post-hoc tests. Results: The amounts of opening of the midpalatal suture during the active phase of expansion were 3.01, 2.17, and 1.15 mm for the anterior, middle, and posterior suture widths, respectively. Pterygoid width also showed a statistically significant increase (1.49 mm). In the postretention period, all transverse measurements had significant decreases except for pterygoid width. Conclusions: At the end of the retention phase after RME therapy, the transverse width of the midpalatal suture was similar to the pretreatment width, whereas the width between the pterygoid processes was significantly increased

Low-dose CT protocol for orthodontic diagnosis.

AIM: This was to correlate the dosimetric evaluation with high diagnostic accuracy by suggesting a protocol that significantly reduces the dose administered by a Dentascan exam without affecting diagnostic accuracy. MATERIALS AND METHODS: 17 patients were selected consecutively (7 males and 10 females) of a mean age of 11.2 (8-14 years) who sought orthodontic treatment. They needed CT control before and after treatment with RME to evaluate impacted canines. The study was performed using a multidetector 16-rows CT with two protocols that provided 2 different KV acquisition parameters: 80 KV or 120 KV. Radiation dose was evaluated in two ways: CTDI and DLP. Image quality was rated and the results were compared to identify significant differences in terms of image quality, radiation exposure and presence of artefacts. RESULTS: The 80 KV scanning has a significantly lower effective radiation dose compared to the 120 KV scanning (p <0.05). The images of all patients were used for comparing the protocols in terms of image quality. The mean scores for the 80 KV scanning images were 4.18 +/-0.81 and 4.41 +/-0.80 for dose obtained by 120 KV scanning. The median image quality was 4 (good) for both protocols. The 80 KV protocol allowed, as well as the 120 KV, a careful analysis by the orthodontist and the dental surgeon that together, based on this images, can choose the best line of treatment between several available options. CONCLUSION: 80 KV protocols compared with 120 KV protocols resulted in reduced total radiation dose without relevant loss of diagnostic image information and quality. The images were good enough to obtain information about the exact position of impacted teeth and to plan the best line of surgical treatment and mechanotherapy strategy

Bonded versus banded rapid palatal expander followed by facial mask therapy: analysis on digital dental casts.

To compare the dental effects produced by a bonded versus a banded expander combined with facial mask (FM) in patients with Class III malocclusion by means of digital dental casts. MATERIALS AND METHODS: Two groups of patients with Class III malocclusion and maxillary transverse deficiency in the deciduous or early mixed dentition were selected. The first group consisted of 25 subjects (12 females; 13 males) with a mean age of 7.4 years (SD 1.2 years) treated with a bonded expander and FM. The second group consisted of 25 subjects (13 females; 12 males) with a mean age of 8.1 years (SD 1.3 years) treated with a banded expander and FM. For each subject of the two groups, initial (pre-treatment, T1) and final (post-treatment, T2) dental casts were taken and scanned. Maxillary digital models of T1 and T2 were superimposed on the palatal rugae in order to analyse the maxillary anchorage loss. Significant between-group differences were tested with independent sample t-test (P < 0.05). RESULTS: No statistical differences were found for any of the variables observed. CONCLUSION: Orthopaedic treatment of Class III malocclusion with either a bonded or a banded expander and FM during the deciduous or early mixed dentition induced a significant expansion of the maxillary arch and a slight mesialization of the posterior anchoring teeth with no difference between the two intraoral appliance design

Measurement and Processing of Road Irregularity for Surface Generation and Tyre Dynamics Simulation in NVH Context

Nowadays, finite element tyre models are often used to perform vehicle NVH (noise, vibration, harshness) simulations. To account for the specific operating conditions, a road surface must be properly included in the model. This paper deals with a methodology to experimentally evaluate and process road irregularity measurements, so as to generate a road surface input. These surfaces are used to simulate the tyre/road interaction at the footprint, which is modelled as a contact surface in finite element tyre models. For this reason, a linear profile of the road surface is not suitable for these simulations and the whole surface must be considered. Starting from the measurements taken through a test equipment specifically designed to carry laser sensors and scan road profiles, the Power Spectral Density (PSD) of a specific track is estimated and then interpolated considering piecewise functions. Finally, a model to generate a road surface starting from the measured PSD is developed, discussed and validated

Modifications of midpalatal sutural density induced by rapid maxillary expansion: A low-dose computed-tomography evaluation.

INTRODUCTION: The aim of this study was to evaluate the density of the midpalatal suture as assessed by low-dose computed tomography (CT) before rapid maxillary expansion (RME) (T0), at the end of active expansion (T1), and after a retention period of 6 months (T2). METHODS: The study sample comprised 17 prepubertal subjects (mean age, 11.2 years) with constricted maxillary arches and unilateral or bilateral posterior crossbite. The total amount of expansion was 7 mm in all subjects. Multi-slice low-dose CT scans were taken at T0, T1, and T2. On axial CT scanned images, 4 regions of interest (ROIs) were placed along the midpalatal suture (anterior [AS ROI] and posterior [PS ROI]) and in 2 regions of palatal bone (anterior and posterior). Density was measured in Hounsfield units. The Mann-Whitney U test and Friedman analysis of variance (ANOVA) with post-hoc test were used (P <0.05). RESULTS: The densities in the AS and PS ROIs were significantly smaller than the reference bone densities before RME therapy. Both AS and PS ROIs showed significant decreases in density from T0 to T1, significant increases from T1 to T2, and no significant differences from T0 to T2. CONCLUSIONS: The effective opening of the midpalatal suture by RME in prepubertal subjects was associated with a significant decrease in sutural density. The sutural density after 6 months of retention post-RME indicated reorganization of the midpalatal suture, since it showed values similar to the pretreatment ones

Enamel interproximal reduction during treatment with clear aligners: digital planning versus OrthoCAD analysis

Background The aim of the study was to compare the amount of interproximal enamel reduction (IPR) provided on ClinCheck software with the amount of IPR carried out by the orthodontist during treatment with clear aligners. Methods 30 subjects (14 males, 16 females; mean age of 24.53 +/- 13.41 years) randomly recruited from the Invisalign account of the Department of Orthodontics at the University of Rome "Tor Vergata" from November 2018 to October 2019, were collected according to the following inclusion criteria: mild to moderate dento-alveolar discrepancy (1.5-6.5 mm); Class I canine and molar relationship; full permanent dentition (excluding third molars); both arches treated only using Comprehensive Package by Invisalign system; treatment plan including IPR. Pre- (T0) and post-treatment (T1) digital models (.stl files), created from an iTero scan, were collected from all selected patients. The OrthoCAD digital software was used to measure tooth mesiodistal width in upper and lower arches before (T0) and at the end of treatment (T1) before any refinement. The widest mesio-distal diameter was measured for each tooth excluding molars by "Diagnostic" OrthoCAD tool. The total amount of IPR performed during treatment was obtained comparing the sum of mesio-distal widths of all measured teeth at T0 and T1. Significant T1-T0 differences were tested with dependent sample t-test (P &lt; 0.05). Results In the upper arch, IPR was digitally planned on average for 0.62 mm while in the lower arch was on average for 1.92 mm. As for the amount of enamel actually removed after IPR performing, it was on average 0.62 mm in the maxillary arch. In the mandibular arch, the mean of IPR carried out was 1.93 mm. The difference between planned IPR and performed IPR is described: this difference was on average 0.00 mm in the upper arch and 0.01 in the lower arch. Conclusions The amount of enamel removed in vivo corresponded with the amount of IPR planned by the Orthodontist using ClinCheck software